05 FORD F-150 4.6L ECU ECM PCM ENGINE COMPUTER 5L3A-12A650-ADD BAD CONNECTOR
Product Description
Part Number
5L3A-12A650-ADD
ECU will arrive with updated part number sticker having been programmed with latest Ford Software Updates!
**NOTE: Two connectors are all good, lock tabs are place. One connector has chipped plastic but the lock tab is good - see pictures. Your mechanic will have to engineer a way to keep water out of the connector. Please be sure you are good with this condition before purchasing.
Fitment/Interchange
This ecu will interchange or replace the following ecu part numbers for 2005 Ford F-150 4.6L trucks:
5L3A-12A650-ADA
5L3A-12A650-ADB
5L3A-12A650-ADC
5L3A-12A650-ADD
5L3A-12A650-AGA
5L3A-12A650-AGB
5L3A-12A650-AGC
5L3A-12A650-AGD
5L3A-12A650-AKA
5L3A-12A650-AKB
5L3A-12A650-AKC
5L3A-12A650-AKD
5L3A-12A650-CCA
5L3A-12A650-CDA
5L3A-12A650-CEA
5U7A-12A650-GVA
5U7A-12A650-HAA
5U7A-12A650-HDA
Tech Notes
- ECU has been tested with our state of the art vehicle simulator which tests over 25 circuits of the ECU! Some of those are listed below:
- Reference Voltage Good!
- ECU has transmission communication!
- ECU powered up and has communication!
- ECU fuel pump/maiN relay tested good!
- ECU air conditioning communication tested good!
- ECU injectors/coils tested good and much more!
- Two connectors are all good, lock tabs are place. One connector has chipped plastic but the lock tab is good - see pictures. Your mechanic will have to engineer a way to keep water out of the connector. Please be sure you are good with this condition before purchasing.
Install Notes
- Disconnect the negative terminal of the battery. Make sure the battery connector is not touching the battery post.
- Disconnect and remove the module to be replaced.
- Install and connect the replacement module.
- Connect the negative terminal of the battery.
- For *Plug N Play* Complete the relearn process for the ECU. Instructions will be provided with the unit. See details below.
*Plug N Play* Programming / PATS Security
For Plug and Play you must have **TWO CHIPPED NON-CLONED KEYS** and follow the below instructions. If you have the two original keys with the Ford logo on them, you are ready to complete the following instructions:
Step 1: Purchase correct ecu for your application - see fitment guide above for details.
Step 2: Program ecu to your VIN. We provide free programming for our customers. During checkout you must list your VIN and mileage in the "Notes to Seller" for us to program the ECM. If we do not hear from you through the order notes or a message through eBay we will assume your mechanic is performing the programming (no problem at all) and we will ship the ECM out the next business day as directed by eBay.
Step 3: Once the ecu is installed you will then need to follow the instructions we include and after completion of these steps the vehicle will be operational - No trip to your dealer! These instructions require no special tools.
Item Condition
- Mounting points are all open and intact
- Pins perfect, none are broken or bent
- Two connectors are all good, lock tabs are place. One connector has chipped plastic but the lock tab is good - see pictures. Your mechanic will have to engineer a way to keep water out of the connector. Please be sure you are good with this condition before purchasing.
Warranty
This ECM comes with a 90 day warranty from the date of purchase. Please keep a copy of your purchase record which we will send with your item.