16 JEEP CHEROKEE 3.2L ECU ECM PCM ENGINE CONTROL COMPUTER 68265669AF TESTED AWD

68265669

ECU requires programming after installation.

This ecu will interchange or replace the following part numbers:

68265669AA

68265669AB

68265669AC

68265669AD

68265669AE

68265669AF

68265669AG

68265669AH

68265669AI

68265669AJ

P68265669AJ

R8265669AJ

68265669AJ

ECU has been tested with our state of the art vehicle simulator which tests over 25 circuits of the ECU! If any issues were found the unit has been rebuilt. Some of these tests are listed below:
• Alternator charging and purge circuits are working as they should
• O2 Heater circuits good!
• Reference Voltage good!
• ECU powered up and has communication!
• ECU fuel pump/main relay test good!
• ECU injectors/coils test good and much more!

• Disconnect the negative terminal of the battery. Make sure the battery connector is not touching the battery post.
• Disconnect and remove the module to be replaced.
• Install and connect the replacement module.
• Connect the negative terminal of the battery.
• See "Programming" below for additional install instructions.

For Plug and Play you must follow the below three steps:

Step 1: Match your part number series per above fitment guide

Step 2: Your ecu has SKIM so it will need programming or you will get a crank no start.

Step 3: Program ecu to your VIN and mileage. Your local dealer or certified mechanic will be able to handle this. Once programming is completed you will be good to go!

• Mounting points are all open and intact
• Pins perfect, none are broken or bent
• Connectors may have some chips in the plastic but all of the lock tabs are in place

This ECM comes with a 90 day warranty from the date of purchase. Please keep a copy of your purchase record which we will send with your item.