TIPM Installation Issues
TIPM Installation Issues
DO NOT SEND YOUR CORE BACK UNTIL ISSUES ARE RESOLVED
-
No Crank / No Start - Perform hard reboot:
- Disconnect both battery terminals
- Tie cables together, metal ends touching
- Leave them touching for 30 minutes
- Reconnect battery
- Perform installation steps again
Did you match your part number, excluding letters? Example: If your part number is 56049720AR, you need to match 56049720
-
Turn Signals / Fog Lamp issue
Ensure all fuses are correct and match your original TIPM setup. Test and replace related fuses as a precaution. If this does not resolve the issue, it is a common issue caused by wiring mis-match. Please click the button below to get the steps.
Part Numbers Impacted
04692315 04692316 04692335 68089321 68105501 68163904 68165592 68244877 68244881 68244884 68244893 -
Same issues as original TIPM
This is typically caused by an issue elsewhere in the vehicle. We would recommend further diagnostics with your original TIPM in the vehicle and returning the unit purchased from us.
-
Random items not working
Identify what is not working and test/replace the related fuses as a precaution. If this does not correct the issue, re-verify your part number and ensure that it matches
Example: If your part number is 56049720AR, you need to match 56049720.
If your part number does not match, that is the cause of the issues as there are internal electrical differences and these units are part number specific, not vehicle specific.
If your part number does match and the issues persist, please contact us and fill out all information asked and we can move forward with determining a solution -
Transmission Not Shifting Correctly
Replace fuse J18, located in the top right of the TIPM usually. Ensure that this is the correct PCM Trans Range fuse for your TIPM by checking the lid fuse layout. Clear codes, drive, ensure that the code does not come back.