09 DODGE RAM 2500 3500 6.7L TRANSMISSION CONTROL UNIT TCU MODULE 68053123 OEM

68053123 - you must match this!

This TCU will require programming however we offer free plug and play programming! Just supply your VIN at the time of checkout or message us after your purchase with the VIN.

This tcu will interchange or replace the following part numbers: 68053123. Please use the part number to verify fitment with your mechanic prior to purchasing if you are unsure this will work in your truck.

TCU has been tested by our experienced electronics techs! Some of those tests are listed below:

• TCU has communication and power and grounds!
• TCU has transmission solenoid output signal!

• Disconnect the negative terminal of the battery. Make sure the battery connector is not touching the battery post.
• Disconnect and remove the module to be replaced.
• Install and connect the replacement module.
• Connect the negative terminal of the battery.
• Programming will be required. Please discuss this with your mechanic before purchasing this TCU. OR, supply your VIN at checkout and we'll take it from there!

• Mounting points are all open and intact
• Connector pins are perfect, none are broken or bent
• Connectors may have small chips in the plastic but the lock tabs are all in place

This TCU comes with a 3 month warranty from the date of purchase. Please keep a copy of your purchase record which we will send with your item.