Cart 0
11 F-150 3.5L ECOBOOST ECU ECM ENGINE CONTROL COMPUTER BL3A-12A650-AZD TESTED
11 F-150 3.5L ECOBOOST ECU ECM ENGINE CONTROL COMPUTER BL3A-12A650-AZD TESTED
11 F-150 3.5L ECOBOOST ECU ECM ENGINE CONTROL COMPUTER BL3A-12A650-AZD TESTED
11 F-150 3.5L ECOBOOST ECU ECM ENGINE CONTROL COMPUTER BL3A-12A650-AZD TESTED
11 F-150 3.5L ECOBOOST ECU ECM ENGINE CONTROL COMPUTER BL3A-12A650-AZD TESTED
11 F-150 3.5L ECOBOOST ECU ECM ENGINE CONTROL COMPUTER BL3A-12A650-AZD TESTED
11 F-150 3.5L ECOBOOST ECU ECM ENGINE CONTROL COMPUTER BL3A-12A650-AZD TESTED
11 F-150 3.5L ECOBOOST ECU ECM ENGINE CONTROL COMPUTER BL3A-12A650-AZD TESTED
11 F-150 3.5L ECOBOOST ECU ECM ENGINE CONTROL COMPUTER BL3A-12A650-AZD TESTED

11 F-150 3.5L ECOBOOST ECU ECM ENGINE CONTROL COMPUTER BL3A-12A650-AZD TESTED

Product Description

Part Number

BL3A-12A650-AZD

ECU will arrive with updated part number sticker having been programmed with latest Ford Software Updates!

Fitment/Interchange

This ecu will interchange or replace the following ecu part numbers:

BL3A-12A650-AYJ

BL3A-12A650-AZA

BL3A-12A650-AZB

BL3A-12A650-AZC

BL3A-12A650-AZD

BL3A-12A650-AZE

BL3A-12A650-AZF

BL3A-12A650-AZG

BL3A-12A650-AZH

BL3A-12A650-AZI

BL3A-12A650-AZJ

BL3A-12A650-AXD

BL3A-12A650-BBA

Tech Notes

    ECU has been tested with our state of the art vehicle simulator which tests over 25 circuits of the ECU! Some of those are listed below:
  • Reference Voltage Good!
  • ECU has transmission communication!
  • ECU powered up and has communication!
  • ECU fuel pump/mail relay tested good!
  • ECU injectors/coils tested good and much more!

Install Notes

  • Disconnect the negative terminal of the battery. Make sure the battery connector is not touching the battery post.
  • Disconnect and remove the module to be replaced.
  • Install and connect the replacement module.
  • Connect the negative terminal of the battery.
  • See "Programming / PATS Security" below for additional install instructions.

Programming / PATS Security

For Plug and Play you must do the following three steps:

Step 1: Match your part number per above fitment/interchange notes

Step 2: Program ecu to your VIN. You will need your local mechanic, Ford dealer or properly equipped locksmith to program your VIN into the ecu. Without this you will get a "no start" condition. 

Step 3: If your vehicle has PATS security (Most Ford/Lincoln/Mercury's do) you must have your keys programmed. We recommend you have this done by your local locksmith. In most cases they will travel to your location and the process takes less than 30 minutes. No towing necessary and your local locksmith will be cheaper than a dealer. If your vehicle has PATS and is not programmed you will get a "no start".

Item Condition

  • Mounting points are all open and intact
  • Pins perfect, none are broken or bent
  • Lock tabs in place
  • Connector plastic may have minor chip but pins, guides and lock tabs are in place.

Warranty

This ECM comes with a 90 day warranty from the date of purchase. Please keep a copy of your purchase record which we will send with your item.