11 FLEX MKS TAURUS 3.5L ECU ECM PCM ENGINE COMPUTER BA8A-12A650-LC OEM PROBADA
Product Description
Part Number
BA8A-12A650-LC **TO PROGRAM THIS ECU PROPERLY FOR YOU WE WILL NEED YOUR VIN AT CHECKOUT**
ECU will arrive with updated part number sticker having been programmed with latest Ford Software Updates!
Fitment/Interchange
This ecu will interchange or replace the following ecu part numbers on 2011 Ford Flex, Ford Taurus and Lincoln MKS 3.5L and 3.7L:
BA8A-12A650-LA
BA8A-12A650-LB
BA8A-12A650-LC
BA8A-12A650-MA
BA8A-12A650-MB
BA8A-12A650-MC
BA8A-12A650-NA
BA8A-12A650-NB
BA8A-12A650-NC
Tech Notes
- ECU has been tested with our state of the art vehicle simulator which tests over 25 circuits of the ECU! Some of those are listed below:
- Reference Voltage Good!
- ECU has TCU communication!
- ECU powered up and has communication!
- ECU fuel pump/main relay tested good!
- ECU injectors/coils tested good and much more!
Install Notes
- Disconnect the negative terminal of the battery. Make sure the battery connector is not touching the battery post.
- Disconnect and remove the module to be replaced.
- Install and connect the replacement module.
- Connect the negative terminal of the battery.
- See "Programming / PATS Security" below for additional install instructions.
Programming / PATS Security
For Plug and Play you must do the following three steps:
Step 1: Match your part number per above fitment guide
Step 2: Program ecu to your VIN. You will need your local mechanic, Ford dealer or properly equipped locksmith to program your VIN into the ecu. Without doing this you will get a "no start" condition.
Step 3: If your vehicle has PATS security (Most Ford/Lincoln/Mercury's do) you must have your keys programmed. We recommend you have this done by your local locksmith. In most cases they will travel to your location and the process takes less than 30 minutes. No towing necessary and your local locksmith will be cheaper than a dealer.
Item Condition
- Mounting points are all open and intact
- Pins perfect, none are broken or bent
- Lock tabs in place
- Connector plastic may have minor chip but pins, guides and lock tabs are in place.
Warranty
This ECM comes with a 90 day warranty from the date of purchase. Please keep a copy of your purchase record which we will send with your item.